Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Construction in Sunrise Manor, NV | Slatestone Contractors
We provide independent Therma-Tru entry and patio door service across Sunrise Manor, from full door system replacements to sill and seal repairs on existing Fiber-Classic and Smooth-Star units. What makes our Therma-Tru work different here is simple: we know how Clark County permitting works in an unincorporated township, and we know what this specific desert does to a fiberglass door assembly over five or ten summers. Call (833) 734-5541 for a free estimate, and we’ll walk the door with you before we quote a single line item.
Why Sunrise Manor Residents Choose Us for Therma-Tru Service
We’ve installed and serviced Therma-Tru door systems across the east Las Vegas Valley for years, including Therma-Tru service in Nellis Air Force Base. We know the frame, sill, and glass assemblies down to the part number, which means we diagnose what your specific door actually needs instead of steering you toward whatever a dealer program pushes. We work independently of Therma-Tru, so there’s no factory incentive driving a replacement quote when a repair makes more sense.
Slatestone Contractors is led by Brent Calloway, who grew up in Green Valley and learned building systems through the construction technology program at College of Southern Nevada. That background matters on a Therma-Tru service call, because the door is only as good as the rough opening, the slab it sits on, and the weatherproofing behind the brickmold. We bring the full remodeling and exterior envelope knowledge to every job, not just a parts list. For the broader scope of Therma-Tru sales & service, we can also handle the surrounding kitchen, bath, or roof work that often surfaces once we start opening walls around a door.
Styles & brands we work with







Common Therma-Tru Construction Problems We Solve in Sunrise Manor
- Baked-out sill and threshold seals. Sunrise Manor’s extreme UV and near-zero humidity break down factory weatherstripping and sill gaskets within a few summers. A door that sealed tight when it was installed starts admitting grit, drafts, and hot air at the sweep, and most homeowners don’t notice until the carpet near the entry is gray with fine dust.
- Chalked and faded Fiber-Classic door skins. West- and south-facing Therma-Tru Fiber-Classic doors take full desert sun for six to eight hours a day. The factory stain or paint finish chalks and fades well before the fiberglass substrate fails, so the door looks worn out years before it actually is.
- Drifting adjustable sills and multi-point hardware. Slab-on-grade tract homes in the 89115 ZIP settle slowly over decades, and there’s no basement to buffer that movement. Therma-Tru’s adjustable sills and multi-point locks drift with the slab, so doors begin to drag at the corner or fail to latch cleanly.
- Monsoon microburst leaks at patio and entry doors. When a microburst hits a flat, exposed lot, rain drives sideways against doors that have been dry for months. Dried-out corner seals and compressed weatherstripping that looked fine in the dry season leak at the first real storm.
- Rusted sills on older ranch homes. On 1960s to 1990s tract homes, the original Therma-Tru sill pans and adjusters rust out from decades of condensation and the occasional irrigation overspray. We pull the door, assess the sill, and replace with OEM components when the frame is still sound.
Therma-Tru Service in Sunrise Manor: What Local Conditions Mean for Your Equipment
Here’s the piece most door companies miss about Sunrise Manor: it’s unincorporated Clark County, not the City of Las Vegas. An exterior door replacement here goes to the Clark County building department, not a city permit desk. If you’re resizing a rough opening for a new Therma-Tru unit, or changing the swing, egress path, or sidelight configuration, county inspectors can red-tag work that met City of Las Vegas specs. We learned this the hard way years ago on a door swap near Lamb Boulevard, and we’ve filed county permits for Sunrise Manor door work ever since, with similar experience on Therma-Tru repair in Whitney. That same 1970s ranch off Lamb in the 89115 ZIP had a sun-chalked Fiber-Classic entry door we pulled to find the adjustable sill rusted and the sweep gone entirely, letting 150°F attic air and monsoon grit into the hallway. We replaced the OEM sill and sweep set, re-squared the frame to the settled slab, and reset the door so it latched clean and sealed against the next microburst. The owner kept the original door skin and spent the savings on the worn weatherstrip and hinges. Build it right the first time. The desert has a long memory.
We serve all of Sunrise Manor service area including the full 89115 ZIP, and our work here is shaped by the housing stock: modest mid-century to 1990s single-story ranch tract homes with slab foundations and attics that bake at 150°F in summer. A door on one of these homes lives a harder life than a door on a two-story Henderson build, because the slab moves, the sun hits harder on a flat lot, and the house itself flexes more with the temperature swings.
Therma-Tru Models & Products We Service in Sunrise Manor
We service the full Therma-Tru residential line: Fiber-Classic entry doors, Smooth-Star smooth fiberglass doors, Classic-Craft American Style collection doors, and Therma-Tru fiberglass patio and sidelight systems. When a frame and door are sound, we use OEM Therma-Tru sills, sweeps, weatherstripping, and hardware, because those assemblies are engineered as a matched system and generic seals fail faster in desert heat. When the skin, frame, or glass seal is structurally compromised, we say so directly rather than patching a door that will keep costing you. For Sunrise Manor turnaround, we keep common OEM sweep, sill, and hinge stock on hand so most repairs don’t wait on a parts shipment.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Service Pricing in Sunrise Manor
What you pay depends on whether we’re repairing the existing door, replacing components, or pulling the whole unit and installing new. Here are the line-item ranges we quote across Slatestone’s full scope:
| Service | Price Range |
|---|---|
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
| Impact Window Installation | $8,000 – $25,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Full Bathroom Remodeling | $9,000 – $28,000 |
A free estimate includes a walk-through of the door, check of the sill and weatherstripping, inspection of the rough opening and slab condition, and a written line-item quote before any work starts. Call (833) 734-5541 to schedule yours, and we’ll tell you straight whether you need a repair or a full replacement.
Serving Sunrise Manor, NV — Our Local Coverage Area
We’re based in the Sunrise Manor area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Therma-Tru Construction in Sunrise Manor
Yes, and it’s a common one. Therma-Tru Fiber-Classic and Smooth-Star doors carry the right fire ratings and egress styles for garage conversions and attached ADUs on 89115 tract lots. The catch in Sunrise Manor is Clark County approval for the egress and swing on the converted space, which we handle as part of the permit package. Call (833) 734-5541 and we’ll spec the correct Therma-Tru unit for your conversion.
No, we’re an independent Therma-Tru service provider. Slatestone Contractors is not manufacturer-affiliated or authorized by Therma-Tru. That independence means we recommend repairs when a repair is what the door actually needs, and we source OEM parts from local distributors rather than running everything through a dealer program.
Yes. Where the door frame and slab are sound, we install OEM Therma-Tru sills, sweeps, weatherstrip, and hardware, because those components are a matched system. Generic door seals and hinges wear out noticeably faster under Sunrise Manor sun and heat.
A typical sill, sweep, and hardware repair runs two to four hours depending on the condition of the rough opening and slab. Full door replacements, especially when we’re resizing the rough opening and pulling Clark County permits for jobs like Therma-Tru service in Winchester, typically take one to two days including finish trim and weatherproofing.
Entry door replacement here generally runs $3,000 to $8,500 installed depending on the door line, sidelight configuration, and whether the existing opening needs reframing. Call (833) 734-5541 for an exact quote on your specific door; estimates are free and we’ll give you a written range before you commit.
Service Areas Near Sunrise Manor
Slatestone Contractors serves Sunrise Manor and the surrounding east valley communities, including Whitney, Winchester, Henderson, and Paradise. We also provide Therma-Tru service in North Las Vegas and Therma-Tru service in Enterprise, so if you’re planning a move or managing a rental property nearby, we’ve got the same OEM-parts approach across the valley.
Book Your Therma-Tru Service in Sunrise Manor Today
If your Therma-Tru door is dragging, leaking, chalked out, or just not latching like it used to, call (833) 734-5541. We’ll set up a free estimate, check the sill and seals, and give you a straight answer on repair versus replacement.
Written by Brent Calloway, Owner at Slatestone Contractors, serving Sunrise Manor and the east Las Vegas Valley.