Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Boulder City, NV | Slatestone Contractors
We install, repair, and replace PGT windows and doors across Boulder City, and we’ve done enough work in the 1931-1935 Historic District to know that PGT projects here run on different rules than PGT repair in Henderson or Las Vegas. The quick answer: if you own a PGT window or door in Boulder City, we can service it, replace the glass, fix the hardware, or do a full restoration-grade swap, and we’ll handle the Historic Preservation Commission paperwork that comes with visible exterior changes. Call (833) 734-5541 for a free estimate.
Slatestone Contractors is an independent contractor. We are not authorized, sponsored, or endorsed by PGT. We diagnose and repair their products honestly, and we don’t make warranty claims on the manufacturer’s behalf. What we do is know PGT’s WinGuard and standard aluminum and vinyl lines well enough to fix them correctly the first time and tell you plainly when replacement beats repair. If you’re in the 89005 or 89006 ZIP codes, this is the page that explains what PGT service actually looks like in Boulder City.
Why Boulder City Residents Choose Us for PGT Service
Most window crews in Southern Nevada cut their teeth on tract housing built after 1990. That’s fine for a stucco box in PGT repair in Whitney, but Boulder City is different. The core of town is a federally planned historic district full of original 1930s Spanish Colonial Revival, Mission, and Bungalow homes, and almost none of those walls are plumb. We’ve spent enough hours pulling old windows on Boulder City’s pre-war lots to know exactly how a PGT vinyl frame behaves when the rough opening is out of square by half an inch. That’s the difference between an installer who shims a window and one who understands what the wall will do to it over ten summers.
Brent Calloway grew up in the Green Valley area of Henderson and learned the trade through the construction technology program at College of Southern Nevada, later building our General Contractor in Boulder City. He started Slatestone because he wanted a crew and a client list small enough to actually stand behind every job, not just sign off on it. That matters in Boulder City, where a wrong window profile can stall a design-review application for weeks. We carry OEM PGT sash locks, rollers, weatherstripping, and glazing gaskets for the model lines homeowners actually have here, and we show up knowing the Historic Preservation Commission’s quirks before we quote the job.
Styles & brands we work with
Common PGT Construction Problems We Solve in Boulder City
- Racked vinyl frames and binding sashes: Original 1931-1935 rough openings are rarely square. PGT vinyl single-hungs and casements set into those openings absorb the wall’s misalignment, and after a few summers of 105°F expansion and contraction, the sashes bind. We pull the unit, square and flash the rough opening, and reset the window so it tracks properly.
- UV-degraded weatherstripping and glazing gaskets: Boulder City sits at roughly 2,500 feet in the Mojave, and the UV load is brutal. PGT aluminum sliders lose their gaskets faster here than in the valley below, which lets dust in and causes water intrusion at the sill during monsoon-driven rain. We replace gaskets before the interior takes damage.
- Moisture trapped between new PGT inserts and original wood frames: Historic-district renovations often mix new PGT inserts with original wood frames. The dissimilar materials trap moisture, and we see finish peeling and hinge corrosion on PGT casements as a result. We flash and seal these transitions properly, which the original retrofit often skipped.
- Seized or misaligned sliding door hardware: PGT multi-point lock hardware on sliding doors seizes when the door settles on a desert slab, especially on south- and west-facing openings that take the worst afternoon heat. We realign the door or replace the lock hardware, and we won’t sell you a full door replacement if the panel and glass are sound.
- Single-pane glass in original steel casement openings: We regularly find early vinyl or aluminum replacements that were squeezed into openings built for original steel casements. The glazing gaps and frame stress are wrong from the start. We size PGT replacements to the actual opening, not the old window’s dimensions, which matters more on Boulder City’s pre-war homes than anywhere else in the region.
PGT Service in Boulder City: What Local Conditions Mean for Your Equipment
The Boulder City Historic Preservation Commission reviews visible exterior changes, including window material and muntin profiles, on any contributing structure in the 1931-1935 Historic District. That means a PGT replacement here often requires a submittal packet with product cut sheets and profile photos that a Las Vegas tract-home installer never has to produce. We’ve built those packets for homeowners on Nevada Way, Avenue B, and throughout the historic core, and we know which PGT profiles read as “compatible” versus which ones stall a review. Off Nevada Way, on a 1930s Spanish Colonial Revival bungalow, our crew found original steel casements that had been swapped for early PGT vinyl single-hungs. The frames had racked in the out-of-square openings and the sashes were binding. We pulled the units, squared and flashed the rough openings, and set new PGT WinGuard Vinyl Series windows sized to the historic muntin pattern, then documented the profile for the owner’s design-review file. That’s the kind of project you only get in Boulder City: same window, completely different stakes.
PGT Models & Products We Service in Boulder City
We service the PGT lines that show up most often in Boulder City’s historic and mid-century housing stock: PGT WinGuard Aluminum Series impact windows, PGT WinGuard Vinyl Series impact windows, PGT Aluminum Series sliding glass doors, and PGT Vinyl Series single-hung and casement windows. We also work on PGT’s standard non-impact vinyl and aluminum lines for homes built in the 1970s and 1980s infill outside the historic core. We source OEM PGT replacement parts, including sash locks, rollers, weatherstripping, and glazing gaskets, whenever they’re available, and we use tested aftermarket hardware only for older or discontinued profiles. If we’re doing a repair in Boulder City, we typically have common PGT parts on the truck, which means less waiting around for a second trip.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Boulder City
PGT service pricing in Boulder City depends on whether we’re repairing hardware, replacing glass, or doing a full window or door swap that goes through design review. Repairs and part replacements cost less than full replacements; full replacements on historic-district homes sometimes cost more than Enterprise PGT service because of the submittal packet, profile matching, and occasional need to square a pre-war rough opening before the new unit goes in. Here are the ranges for the most common PGT construction projects we handle in Boulder City:
| Project | Typical Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Home Addition | $45,000 – $130,000 |
The estimate is free, and it includes a line-item breakdown so you can see exactly what the design-review submittal, materials, and labor cost separately. Call (833) 734-5541 and we’ll walk through your project without any obligation.
Serving Boulder City, NV — Our Local Coverage Area
We’re based in the Boulder City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – PGT Construction in Boulder City
Do I need Historic Preservation Commission approval to replace PGT windows on a 1930s bungalow in Boulder City?
Yes, if the home is a contributing structure in the 1931-1935 Historic District, any visible exterior change, including window material and muntin profiles, goes through design review. We prepare the submittal packet with product cut sheets and profile photos. Call (833) 734-5541 for help with the process, and the estimate is free.
Why do my PGT vinyl windows stick and bind in the summer?
The original rough openings on Boulder City’s pre-war homes are rarely square, and the vinyl frame absorbs that misalignment. When the 105°F heat makes the frame expand, the sashes bind. We fix this by pulling the unit, squaring and flashing the opening, and resetting the window so it tracks correctly.
Can PGT impact windows be used on a historic addition in Boulder City?
Yes, PGT WinGuard impact windows can be used on a historic addition, but the visible profiles and muntin patterns still need to pass design review. We’ve set WinGuard Vinyl Series windows sized to historic muntin patterns on multiple Boulder City bungalows, and we document the profile for the owner’s design-review file. Call (833) 734-5541 to discuss your specific addition and we’ll quote the right window package.
My PGT sliding door lock is hard to turn. Does the whole door need replacing?
Usually not. PGT multi-point lock hardware seizes when the door settles on a desert slab, especially on south- and west-facing openings. We realign the door or replace the lock hardware, and we’ll only recommend a full door replacement if the panel or glass is compromised. Call (833) 734-5541 for a fast diagnosis and a free estimate.
How does Boulder City’s UV and dust affect PGT weatherstripping?
The intense UV at 2,500 feet degrades PGT weatherstripping and glazing gaskets noticeably faster than in the valley below, and the dust it lets in wears down rollers and tracks. We replace gaskets and weatherstripping with OEM parts before the intrusion causes water damage. Call (833) 734-5541 for an exact quote, and the estimate is free.
Service Areas Near Boulder City
We cover Boulder City, Henderson, and Whitney, plus the surrounding parts of Winchester and Paradise. See our Boulder City service area page for ZIP code coverage, and for the adjacent markets, our PGT service in Winchester and PGT service in Paradise pages break down what’s different in each. Learn more about how we handle PGT sales & service under one contract.
Book Your PGT Service in Boulder City Today
If your PGT windows or doors need repair, replacement, or design-review help in Boulder City, call (833) 734-5541 and we’ll schedule a free estimate. Build it right the first time. The desert has a long memory.
Written by Brent Calloway, Owner at Slatestone Contractors, serving Boulder City’s historic district and surrounding areas.