Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Countertop Installation Cost in Henderson?
Countertop installation in Henderson typically runs $2,000 to $6,500 for most kitchens, with the average project landing somewhere near $4,000. That range covers demolition of the old surface, template and fabrication, and installation of a new slab with a standard edge profile. Small vanities and bathroom tops sit at the bottom of the range, while large kitchens in newer builds out in the foothills, plus premium quartz or natural stone, push toward the top.
This guide breaks the numbers down line by line, explains what moves the price in the Henderson market, and shows where homeowners usually save without cutting corners on the material itself.
Key Takeaways
- Most Henderson countertop projects land between $2,000 and $6,500 installed.
- Material choice is the single biggest driver: laminate sits near $40 per square foot, quartz and granite run $60 to $110, and premium slabs go higher.
- Removing an old top, cutting for a sink, and fixing an out-of-level cabinet run all add cost. We quote those up front rather than surprise you mid-project.
- Henderson’s dry desert air and intense UV mean seams and edges get more stress than mild climates. Proper templating and a quality seal matter more than they would elsewhere.
- Free estimates are available. Call (833) 734-5541 to get an exact number for your kitchen.
Countertop Installation Cost Breakdown (2026)
The table below reflects what we see daily in the Henderson market. These are installed prices, meaning the material, fabrication, and labor are all included.
| Line Item | Typical Cost Range |
|---|---|
| Laminate countertop (installed) | $1,800 – $3,500 |
| Butcher block (installed) | $2,000 – $4,500 |
| Granite slab (installed) | $2,500 – $5,500 |
| Engineered quartz (installed) | $3,000 – $6,500 |
| Marble or premium natural stone | $4,500 – $9,000+ |
| Old countertop removal and disposal | $150 – $400 |
| Sink cutout and undermount fitting | $200 – $500 |
| Cooktop or tap hole cutouts | $50 – $150 each |
| Edge profile upgrade (bullnose, ogee, waterfall) | $150 – $1,200 |
| Template and fabrication fee | $150 – $400 |
The full-kitchen total usually lands inside our $2,000 to $6,500 range. The material is the largest single line, often 50 to 65 percent of the bill. Fabrication and installation make up most of the rest. Where a homeowner expects to save, they usually save on edge profiles and cutouts rather than on the slab itself, because the slab is the part you look at every day for the next 20 years.
What Affects Countertop Installation Pricing in Henderson
- Material type. Laminate is the most economical option and can be installed for under $3,500 on a standard kitchen. Engineered quartz from brands like Cambria, Caesarstone, and Silestone runs higher but performs well in Henderson’s climate and needs no annual sealing. Natural stone sits at the top because it’s heavier, harder to cut cleanly, and each slab is unique.
- Slab size and kitchen footprint. A 30-square-foot galley kitchen in a mid-century home near Downtown Henderson prices out very differently from a 55-square-foot island kitchen in a new build out in Inspirada or Lake Las Vegas. More surface area means more slabs, more seams, and more labor hours.
- Removal of the old countertop. Most kitchens have a top that’s been glued and screwed down for years. Pulling it without damaging the cabinets takes time. Tile countertops are the slowest to remove, and we see plenty of them in older Henderson homes where the surface predates 1995.
- Cabinet condition beneath. A slab sits flat only if the cabinet boxes are level. Out-of-level cabinets, warped tops, or a dishwasher opening that has sagged all add shimming and prep labor. We check this during the estimate so it doesn’t become a surprise.
- Edge profile and cutouts. A simple square or eased edge is standard. A waterfall edge on an island, a large radius corner, or a custom ogee all require extra machining time.
- Sink and fixture coordination. Switching to an undermount sink means the fabrication shop has to cut and polish a hole that the top sits over. Older drop-in sinks are easier but look dated. This is also the moment to consider whether the plumbing below needs attention, which ties into the fixtures we can source through Kohler, Moen, and Grohe.
One factor that’s specific to this market: the dry desert air and the way it interacts with natural stone. Quartz engineered surfaces don’t care. Marble and certain granites can be more sensitive to sudden heat and to the daily thermal swings in a kitchen with a west-facing window. If you’re choosing natural stone, we recommend reviewing the slab in person and discussing where it will sit.
What’s Included in a Countertop Installation Project
Clarity about scope is where most of the friction between homeowners and contractors happens. Here’s what a full installation through Slatestone Contractors includes from start to finish.
- In-home measure and template. We record the exact dimensions of every counter run, sink location, and any cutouts, then verify cabinet level.
- Material selection. We help you pick from the engineered quartz and natural stone lines we carry, plus laminate and butcher block options if that suits the project.
- Fabrication. Your chosen slab is cut to the template, edges are run, and cutouts are made for the sink and any cooktop.
- Removal and disposal. The old top comes out. We haul it away.
- Installation. The new surface is set, seams are joined, the sink and any undermount are secured, and the perimeter is checked against the wall and cabinets.
- Cleanup. The workspace is cleared, and you’re left with the finished top.
What’s not usually included, and worth discussing during the estimate: the backsplash (a separate line item, typically $800 to $2,500), and any cabinet or plumbing changes the project uncovers.
How to Save on Countertop Installation in Henderson
There are real ways to bring the number down without compromising what you end up living with.
- Keep the existing layout. Moving a sink, cooktop, or dishwasher changes every cutout and adds plumbing and electrical labor. A same-layout replacement keeps the project in the lower half of the range.
- Choose engineered quartz over natural stone. Quartz from Cambria, Caesarstone, or Silestone delivers a consistent look and needs less sealing maintenance. It also tends to cost less per square foot than premium marble.
- Pick a standard edge profile. A square or eased edge looks clean and costs the least. Upgrade only if a specific design calls for it.
- Bundle with a kitchen remodel. If you’re already doing cabinets, the countertop install coordinates with the rest of the project and saves on mobilization. Our full kitchen remodel service in Henderson covers the whole scope under one contract.
- Get an exact quote before you decide. Free estimates take about 30 minutes and give you a firm number instead of a range. Call (833) 734-5541 to schedule one.
Why the Contractor You Choose Changes the Final Price
Countertop installation looks like a single-trade job, but the reality is that a countertop sits on top of cabinetry, surrounds a sink, and coordinates with the backsplash and appliances. When those pieces come from different contractors, small mismatches turn into callback costs and schedule delays. We see this often when a homeowner has hired a separate fabricator and a separate cabinet installer, and neither will own the level issue that makes the slab rock.
Slatestone Contractors handles all of it under one contract. Cabinetry through KraftMaid and Wellborn, countertops through Cambria, Caesarstone, and Silestone, plumbing fixtures through Kohler, Moen, and Grohe, and backsplash tile all come from the same point of accountability. If we’re also re-roofing the house or replacing windows through PGT or Therma-Tru while we’re at it, those projects coordinate on the same schedule instead of fighting for the driveway. From the roof to the pavers, one contractor covers every system.
The same approach applies to whole-home projects. If a Henderson homeowner is converting a garage into an in-law suite or building an ADU through our prefab partners like Abodu or Dvele, the countertops in that new unit come from the same team handling the shell. There’s no seam between phases, which is exactly where scope gaps and budget creep come from.
Henderson Neighborhood Pricing Notes
The Henderson market has distinct pockets, and the pricing within them varies in ways a purely national guide can’t capture.
- Green Valley and Green Valley Ranch: These are 1990s and early-2000s builds. Many kitchens still have original tile counters or the first laminate top, so we frequently quote a full removal and replacement plus cabinet leveling.
- Anthem and Inspirada: Newer construction with larger island kitchens. Surface area is the cost driver more than labor, and homeowners here are often upgrading within the first 10 years of the home’s life.
- Lake Las Vegas and MacDonald Ranch: Larger, often custom homes where premium slabs and waterfall edges are common. Expect these projects to land at the top of the range.
- Downtown Henderson and older neighborhoods: Smaller kitchens with limited counter runs. The project priced out closer to the $2,000 to $3,500 end is often found here.
The desert sun and the fact that many Henderson kitchens have west-facing windows means natural stone tops in those rooms tend to show more thermal variation. We flag this when we’re reviewing material options.
FAQs – Countertop Installation Cost
How much does countertop installation cost in Henderson?
Most Henderson countertop installations cost $2,000 to $6,500, with laminate landing near the low end and quartz or premium natural stone near the top. Small vanities can be done for less than $1,500, while large island kitchens with waterfall edges push past $6,500. Call (833) 734-5541 for a free exact quote.
Is it cheaper to install quartz or granite?
Quartz and granite are close, and the difference usually comes down to the specific slab. Engineered quartz from Cambria, Caesarstone, or Silestone often comes in slightly under premium granite at the same grade. Both land in the $3,000 to $6,500 range for a typical Henderson kitchen. Call (833) 734-5541 and we’ll walk you through the slab options in your budget.
How long does countertop installation take?
From template to finished install is typically 7 to 14 days, with installation itself taking one day for most kitchens. Premium slabs and custom edge profiles can add a few days for fabrication. Call (833) 734-5541 to schedule a measure and confirm a timeline.
Do I need a permit for countertop installation in Henderson?
Usually no. Replacing a countertop on existing cabinets doesn’t require a permit in most Henderson cases, because no structural or plumbing changes are involved. If the project involves moving plumbing, adding an island with a sink, or altering cabinetry, permits may apply. We’ll confirm during the estimate. Call (833) 734-5541 with your project details.
Can you install a countertop over existing cabinets?
Yes, and that’s the most common approach. The cabinets need to be level and in sound condition, which we verify at the measure. If they’re not, we usually recommend addressing that before installation rather than after. Call (833) 734-5541 to have your cabinets assessed alongside the countertop quote.
Get an Exact Number for Your Henderson Kitchen
The ranges on this page are what the market does, not a substitute for a real quote. A 30-minute visit lets us measure every counter run, check the cabinets underneath, and give you a firm price. Call (833) 734-5541 for a free estimate. We install countertops in Henderson as part of full kitchen and bath remodels, and we handle everything from the roof to the pavers under one contract.
Pricing reflects the Henderson market as of 2026. Slatestone Contractors offers free estimates – call (833) 734-5541.
What Our Customers Say
"Quality construction and a professional operation. Communication was strongest at the site meetings, and slower by email in between."
— Lamont Whitfield"Did what they said they'd do. Getting through on the phone during the middle of the day took a couple of tries. After that it was smooth."
— Cedric Carter"Allowances in the contract were realistic rather than artificially low to make the bid look good."
— Miguel Morales